Serial 1 Forum banner
1 - 1 of 1 Posts

· Registered
14 Posts
Discussion Starter · #1 ·
I successfully got my rush/cty step-thru onto the pull-down bike rack on the front of a bus. It was almost too long: the rear wheel dropped-down into the bike wheel slot, but the front only went down part-way. But the bus bike carrier has a “crook” or hook that goes around the top of the front wheel, so it wasn’t going anywhere. I suspect it would fit a bit better with the street tires (instead of my IceSpikers).

Oh, since I can’t really lift my Serial1, I popped-up the front wheel first, then rolled it forwards in the channel, and then lifted the back end and set it in the channel.
1 - 1 of 1 Posts