Hi, Is there a way to raise the handle bar? I leaning too forward and it's not comfortable.
adrianb
Joined
·
13 Posts
yeah no, it's more than difficult to raise the height of the grip location. The limiting elements are the length of the brake lines and the way they're routed. I just spent several hours changing my Cty-S bars. It required parts from TRP (the manufacturer of the brakes) and skills developed over 30 years in bicycle, motorcycle and electrical industries.
If Serial1 had the option of different handlebars with internal routing all that would be required is a pair of TRP hose couplers (for 5mm hose), new olives & barbs and extra 5mm hose to accommodate the extra distance inside the different bars. There is plenty of length for the control wires to the Brose system stuffed inside the handlebars so long as the bars aren't significantly different, like on their Chopper project. The most significant limitation to the change of bars is the internal routing of the front hose. by having it come through the steer tube and the Star Nut it has to be routed through the stem and bar. If the stem had an exit hole underneath the hose could be routed out and then be exposed like on other bikes.
I imagine Serial1 is experiencing production limitations in the same way other industries are. Even if they designed and computer tested a new handlebar it would still have a production lead time of 9-12 months. A project I'm working on with established components that requires no testing has an anticipated delivery of 24 months. The customer asked if $$$$ would grease the wheels, it's a $2 million dollar item, and the likely expedited delivery would be 22 months... with no guarantee.
Later this weekend or early next week I'll post images of what I've done to mine to allow the installation of Surly Moloko bars.
Have a good ride.
If Serial1 had the option of different handlebars with internal routing all that would be required is a pair of TRP hose couplers (for 5mm hose), new olives & barbs and extra 5mm hose to accommodate the extra distance inside the different bars. There is plenty of length for the control wires to the Brose system stuffed inside the handlebars so long as the bars aren't significantly different, like on their Chopper project. The most significant limitation to the change of bars is the internal routing of the front hose. by having it come through the steer tube and the Star Nut it has to be routed through the stem and bar. If the stem had an exit hole underneath the hose could be routed out and then be exposed like on other bikes.
I imagine Serial1 is experiencing production limitations in the same way other industries are. Even if they designed and computer tested a new handlebar it would still have a production lead time of 9-12 months. A project I'm working on with established components that requires no testing has an anticipated delivery of 24 months. The customer asked if $$$$ would grease the wheels, it's a $2 million dollar item, and the likely expedited delivery would be 22 months... with no guarantee.
Later this weekend or early next week I'll post images of what I've done to mine to allow the installation of Surly Moloko bars.
Have a good ride.
Joined
·
13 Posts
If the stem were flipped the plastic decorative cap wouldn’t fit correctly. It’s a shame S1 went for such a sanitized look. There would be so many fit options if they ran hoses and wires differently.
Joined
·
13 Posts
There’s one problem with installing more spacers under the stem. You’ll run out of steer tube (in yellow) to clamp with the stem. The front brake line (in red) travels through the inside of the steer tube. The rear brake, Brose wires and lighting wires (in blue) are routes up the downtube, up the head tube and through the stem.
You can’t add more stack height to the spacers.
![Image]()
You can’t add more stack height to the spacers.
Joined
·
13 Posts
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
